 |
|
|
|
WANNATER HT-100 Aliphatic Polyisocyanate HDI
|
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
WANNATER HT-100
Application
WANNATER HT-100 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.
Equivalent weight approx. 193
Density at 25 approx. 1.16 g/ml
Flash point approx. 158
WANNATER HT-100 can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties.
Preferred co-reactants are polyacrylates or polyester polyols.
The main applications for coatings based on WANNATER HT-100 are automotive OEM, automotive refinishing, transportation, industrial finishing and plastics.
|
Specification Properties |
Specification |
|
NCO Content |
21.8 ± 0.3% |
|
Viscosity at 25 °C |
2500 ± 750 mPa·s |
|
Color value (Hazen) |
≤ 40 |
|
Monomeric HDI |
≤ 0.20% |
Package(s)
20 Kg Metal drum
220 Kg Metal drum
Storage / Solubility
Storage in original container. Protect from moisture, heat and foreign material.
WANNATER HT-100 is sensitive to moisture. Storage at higher temperatures will result in increasing of color and viscosity. Recommended storage temperature is -20 ~ 40 C.
WANNATER HT-100 can be thinned with esters, ketones and aromatic hydrocarbons such as ethyl acetate, butyl acetate, propylacetate, , methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, solvent naphtha 100 and mixtures thereof. Generally speaking, it has good compatibility with the solvents listed. However, the solutions formed must be tested for their storage stability. Only PU grade solvents should be used (max.0.05% water, absence of reactive groups such as hydroxyl or amino groups). Aliphatic hydrocarbons are unsuitable as solvents.
Revised: 14 Jan 2014, Version:2.0
WANNATER HT-100 is not recommended to thin to a lower solid content. Prolonged storage of a solution with a lower content may result in turbidity and sedimentation, even condensation.
Compatibility
WANNATER HT-100 can be mixed with the following products: aliphatic polyisocyanates, polyester polyols, aromatic polyisocyanates and polyacrylates.
Shelf Life
It can be stored at least for 9 months at room temperature if stored properly.
Safety Hazards identification
May cause sensitization by skin contact. Contains isocyanates. See information supplied by the manufacturer.
The product is used mainly as a hardener in coating materials or adhesives. The handling of coating materials or adhesives containing reactive polyisocyanates and residual monomeric HDI requires appropriate protective measures referred to in the safety data sheet. These products may therefore be used only in industrial or trade applications. They are not suitable for use in homeworker (DIY) applications.
The safety data sheet should be observed. This contains information on labeling, transport and storage as well as on handing, product safety and ecology.
www.polyaspartic-polyurea.com
Contact: Ms Annie Qing
Mail: export@feiyang.com.cn
Tel: +86 75536694812 or +86 18675621988
Contact Details
Other Products
-
Desmodur N 3600 wannate HT-600 TPA-100 HDMI Hardener
-
Desmodur N 3300 wannate HT-100 TKA-100 HDMI Hardener
-
Desmodur N 3600 wannate HT-600 TPA-100 HDMI Hardener
-
Desmodur N 3300 wannate HT-100 TKA-100 HDMI Hardener
-
FEICURE GB805B-100 Elastic Isocyanate Harder Used as Elastic Flooring and Waterproofing Coatings
-
FEICURE GB925-85 Elastic Isocyanate Harder Used as Waterproof Coatings on High-speed Rail